8 Foot 6 Ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel In Silver Gi Metal Sheet

4X8 Gi Corrugated Zinc Roof Sheets Metal Price Galvanized Steel Roofing Sheet

 Our Roofing metal has lot of good properties:
(1) It is of attractive surface and reasonable design;
(2) It is with high and reliable quality;
(3) It is easy to assemble and dismantle;
(4) It is high practical applicability, economical efficiency and market occupy.
(5) We can make various kinds of roof metal, which will satisfy all the customer's need.

1. GI Roofing Steel Sheet introduction
It is a plain carbon steel sheet coated in a galvanizing process that applies a barrier of zinc to
insulate it from the elements. Most of the corrugated roofing and siding products seen today
and for many years past are made with a galvanized finish

2.GI Roofing Steel Sheet finish
As with almost any product the finish of the galvanized metal finish will change over time. After
a period of time, the surface will appear to have a white oxide look. When this happens the
material is actually protecting itself from further damage. We stock and sell several corrugated
and decking panels in either a (G-60) or (G-90) level of galvanizing

3. GI Roofing Steel Sheet application scope
It is most commonly used for commercial, agricultural, and industrial purposes, however, it is
now also being recognized as an excellent form of residential roofing

4. GI Roofing Steel Sheet advantages compared with normal one
A normal steel sheet will rust almost immediately, but galvanizing will protect the steel. This
galvanized, eltro-coated, hot-dipped process produces a silvery look or spangled finish. As
a standard, several of our industrial metal siding, metal roofing, metal decking, corrugated
metal panels and accessories are made in galvanized steel

5. GI Roofing Steel Sheet technical processing
Hot rolled steel coil -->Cold rolled- >hot dipped galvanized/ galvalume- > corrugated-->packing

6. GI Roofing Steel Sheet common size as follows
1) 762mm to 665mm(ater corrugated)and 9 waves
2) 914mm to 750mm(after corrugated)and 11 waves
3) 1000mm to 890 or 900mm(after corrugated and12or14waves

Product Description
 

Chemical Composition and Mechanical Properties

Product Description
 

Product Detail
 

Application

Quality Control
 

Customer Praise
 

Packaging and shipping
 

FAQ

Q1. Where is your factory ?
A1: Our company's processing center is located in Jiangsu, Wuxi, China.
Which is well equipped with kinds of machines, such as laser cutting machine,mirror polishing machine and so on.
We can provide a wide range of personalized services according to the customers' needs.